The manufacturer of the slag picker introduces the working principle and structure of the slag picker
Release time:
2022-11-29
Author:
Source:
Abstract
The slag picker, also known as the backhoe loader, combines the digging part and the loading part into one, integrating the functions of slag scraping and loading. It has the characteristics of safety, environmental protection, low energy consumption and high efficiency. Wide practical range, especially suitable for narrow space operations. Below, the slag picker manufacturers will introduce you in detail, so that you can understand its relevant knowledge.
1. slag skimmer manufacturer-working principle of slag skimmer 1. The walking mechanism is externally connected with a three-phase 660(380)V power supply, the electric control button operates the oil pump, and the multi-way valve handle operates the hydraulic motor. The motor drives the transfer case, and the transfer case drives the front and rear axles to rotate respectively, thereby driving the tires to walk.
2. The working mechanism is operated by the oil pump, and the boom, stick and bucket are manipulated through the multi-way valve handle to complete various functions such as rising, falling, extending forward, retracting backward, turning and digging. The control of the expansion and contraction of the rotary cylinder can make the boom rotate left and right, and the two ends of the rotary cylinder are equipped with one-way throttle valves to control the speed. The manufacturer of the slag picker said that by controlling the expansion and contraction of the boom cylinder, the boom can move up and down. One end of the boom cylinder with a rod cavity is provided with a one-way throttle valve to control the descending speed of the boom. Control the expansion and contraction of the boom cylinder can make the boom move forward and backward. The bucket can be excavated by controlling the expansion and contraction of the bucket cylinder. The bucket is equipped with bucket teeth, which can be replaced after wear.
2. slag skimmer manufacturers-the structure and composition of the slag skimmer 1. The machine base is a welded part of the machine base. The four extended support legs are welded by H-shaped steel to make the machine base firm and reliable. The four legs of the frame are connected to the platform or concrete foundation by anchor bolts.
2. Airframe slewing equipment: composed of slewing support, hydraulic drive device, vertical planetary reducer, etc. Above the base of the slag scraper is equipped with a rotary support, which can bear the huge load of the whole upper equipment and the large slag scraping force. The driving device adopts a hydraulic motor with integrated reducer, which has the advantages of small size, large torque and large radial force of the output shaft.
3. According to the introduction of the slag skimmer manufacturer, the machine lifting equipment: four parallel lifting guide rails are set on the rotating body, and the guide rails are welded and processed as a whole. The body lifting ram adopts sliding pad to ensure the gap between the guide rail and the ram. The lifting action is completed by two synchronous parallel cylinders on both sides. Due to the use of the fuselage lifting device, the telescopic arm is completely in a horizontal working state, there is no need to adjust the working angle, and the operation is very simple.
4. The telescopic arm is installed on the elevator body and driven by a hydraulic cylinder to make the telescopic arm rise. The telescopic arm is composed of a jacket, a telescopic arm and a supporting device. The outer jacket is a rectangular steel pipe structure, and the front end is provided with rollers in four directions to support the front end and make it move quickly. The motor is a low-speed high-torque hydraulic motor, which has the characteristics of large bearing torque, small size and good quality. The chain system consists of front and rear sprockets and several compression sprockets. The chain is a double-row sleeve roller chain designed to withstand more than 11 times the static load tension.
recommend Reading
How to Reduce the Impact of Dust on Mining Slag Rifter
2024-11-14
How to extend the life of the tire wheel slag picker
2024-11-14
What are the advantages of crawler slag skimmer?
2023-02-08
Xiangyang Yahu Electromechanical Co., Ltd. is a joint-stock enterprise mainly engaged in the production and sales of mining machinery. The company is located in Hubei Xiangyang, transportation is very convenient. The slag-skimmer produced by the company has applied for a national patent.