What are the operation steps of mine slag picker?
Release time:
2021-02-22
Author:
Source:
Abstract
What are the operation steps of mine slag picker?
(1) Turn on the main power switch.
(2) After the button indicator light is on, start the oil pump and fan. If it is used or rewired, it should be judged whether the phase sequence is correct. If the phase sequence is incorrect, the machine cannot be started.
(3) to be 10 seconds after the completion of the start to use with pressure. Stop more than 4 hours to let the pump run 5~10 minutes, to work with pressure.
(4) Open the left and right push plates to lower the shovel plate of the transport tank to the ground.
(5) Control the machine to push forward, gather the stone and push the ground flat at the same time.
(6) After confirming that the reprinting vehicle enters the unloading part of the machine, pull the handle to the forward conveying rotation. If you feel that the feeding speed cannot keep up, pull the acceleration confluor handle in place.
(7) Operate the pilot valve to raise the big arm, extend the forearm, put the bucket to a position about the line with the forearm, then lower the big arm and retract the forearm (at the same time make the big arm move up and down slightly), and the stone can be raked into the transportation tank. The rotating arm can be picked up in a large range, and the bucket can be properly retract according to the distance of the stone.
(8) In the process of picking up, always pay attention to whether the scraper chain is normally transported. In case of jamming, stop the transportation in time, otherwise the oil temperature will rise rapidly and cannot work.
The way to release the chain is: pull the conveying rotary lever to the neutral position, and quickly pull the conveying lever back and forth to make the scraper chain impact forward and backward quickly, and then the chain can be released. When there is stone in the transportation tank, the conveying joystick must not be stopped at the conveying reverse position, otherwise the chain or scraper may break, seriously affecting production.
recommend Reading
How to Reduce the Impact of Dust on Mining Slag Rifter
2024-11-14
How to extend the life of the tire wheel slag picker
2024-11-14
What are the advantages of crawler slag skimmer?
2023-02-08
Xiangyang Yahu Electromechanical Co., Ltd. is a joint-stock enterprise mainly engaged in the production and sales of mining machinery. The company is located in Hubei Xiangyang, transportation is very convenient. The slag-skimmer produced by the company has applied for a national patent.