7 kinds of use methods of mine slag raking machine

Release time:

2021-02-22

Author:

Source:


Abstract

There are 7 ways to use the mining slag skimmer. The mining multi-function slag skimmer is a new type of loader developed to improve labor intensity and work efficiency. The machine can directly transport the ore to the conveyor belt. The machine adopts full hydraulic first-come control

There are 7 ways to use the mining slag skimmer. The mining multi-function slag skimmer is a new type of loader developed to improve labor intensity and work efficiency. The machine can directly transport the ore to the conveyor belt. The machine adopts full hydraulic first-come control

① The wire rope (especially the empty rope) of the rake bucket is easy to swing during the slag stripping process, and a reliable protection device is required on the driver's operation side.

The driver should send a signal before driving to make others pay attention. When picking up slag, the rake bucket is within the range of round trip, and no one is allowed to stand or do other work.

③ Avoid tightening the two operating handles at the same time to prevent the rake bucket from flying.

④ If the rake bucket is blocked or overloaded in the process of rock stripping, it should not be forced to pull, but the rake bucket should be moved back and then stripped.

⑤ When the winch is working, at least three wire rope allowances shall be reserved on the drum.

⑥ The pile of gangue before the feed chute shall not be too high, and the pile of gangue in the chute shall not be too much to prevent accidents caused by winch overload and gangue and rake jumping out of the chute.

⑦ After slagging, the rake shall be opened to the front of the trough, and then the tail wheel unloaded from the head-on shall be placed in the rake to prevent it from being buried by rocks after blasting.

recommend Reading


How to Reduce the Impact of Dust on Mining Slag Rifter


The mining slag raking machine is equipped with a U-shaped ore hopper car, especially in a narrow mine. The track is laid in the mine hole, which can be used for the U-shaped mine hopper car to be linked into a whole slag discharging and transporting equipment similar to a small train. The rail wheel slag skimmer can arbitrarily adjust the unloading position of the rear tail of the mine slag skimmer under the action of the steering oil cylinder on the chassis according to the position of the mine hopper car, so as to accurately unload the slag. After it is full, it is pulled out by rail without partial slag leakage.

2024-11-14

How to extend the life of the tire wheel slag picker


Wheeled slag skimmer is a widely used slag skimmer at present. However, due to the harsh working conditions of the wheeled slag skimmer, the tires are easy to wear, which brings troubles to mine production. So how can we extend the life of the tires?

2024-11-14

What are the advantages of crawler slag skimmer?


With the continuous progress of science and technology, all walks of life have also been greatly developed. The development prospect of crawler slag picker is also very good, so the demand is increasing, and many manufacturers have been added to the market. As manufacturers, it is also necessary for us to tell you about the advantages of crawler slag picker. Interested partners can come and have a look.

2023-02-08